Delta machines are increasingly being used to replace cam-type machines. To ensure a smooth transition for the watchmaking industry, Tornos is offering a number of options which will adapt the machine to the watchmaking sector.
8x8 cross section adapter on Delta machines.
.
Fixed guide bush The fixed guide bush used has proven its worth a million times over on the Deco 10. This type of guide bush with a 16 mm body (B16/1353/J6R/…) is the "watchmaking standard" and was not previously available on the Delta.
- Working with a fixed guide bush enables more accurate and efficient machining
- The integrated spray provides perfect lubrication of the bar Clamping sleeve for secondary operations, adjustable from the front When machining delicate parts during secondary operations, grip is sometimes an issue. For example, when clamping on a thread or on a tube with slim walls, it is necessary to adjust the clamping force to ensure the workpiece is not deformed.
- Clamping force mechanically reduced
- Easy adjustment to suit each workpiece
- Adjustment from the front of the counter spindle
- Simple mechanical system Adaptation for 8x8 tool holder Watchmakers usually work with tool holders with an 8x8 cross section. Tornos has developed an interface to allow this type of tool to be fitted on Delta machines without changing the original base plates.
- Use of the "watchmaking standards"
- Universality of tools across the watchmaking machine banks
- Quick and easy system to put in place
For more information Tornos Industrielle 111 CH 2740 Moutier +41 32 494 44 44 [email protected] www.tornos.com
