During the Siams 2002, Tornos unveiled the DECO 13a, a machine which offered all the advantages of the DECO 10a machine launched 6 years earlier. Since that time, over 1500 of these machines have been sold and used to produce technical parts all over the world. During Simodec 2010, Tornos will present the next step in DECO’s evolution with the EvoDECO 16a. The first thing that stands out is the departure in terms of design compared with the classic rounded DECO models.
If the DECO 13 machines were a success, it is due to the fact that customers found definite advantages to using them. In terms of major components that have not changed, we can cite the kinematics and its four independent tool systems. The four independent tool systems make it possible to work simultaneously on the bar and a secondary operation with four tools engaged simultaneously in the material if necessary. A second point which remained unchanged is the number of axes. The machine still has 10 axes (plus 2 C axes). Also unchanged is the current devices, tool holders and tools which are completely compatible with those of the DECO 13a. In this way, a customer who is already well-equipped will be able to benefit from this interchangeability.
New items that offer even more! In addition to the immediately arresting new design, the engineers at Tornos decided to switch to 16 mm. This makes it possible to work up to this diameter with no preparation. Another significant evolution is that the spindles and counter spindles are identical and are powered spindles. The torque and power available have been notably increased compared with the DECO 13. Another new item is the design components that have been completely overhauled to benefit from creation using finite elements, making it possible to calculate precisely the rigidity and the frequencies that the housings are able to withstand. Improved rigidity means better finishes and greatly improved lifespan of the tools.
The equipment: a clear advantage… The machine comes with excellent basic equipment. It includes all the drive systems for the rotating tools, the C axes, interpolation in polar coordinates (transmit function) and automatic central cyclical lubrication. These additional items are often sold as supplements and increase the cost of the machine. Even with all these technical innovations, the EvoDECO 16 will be sold for considerably less than the previous DECO 13a turning machine! But that is not all, the engineers at Tornos have prepared other advantages that customers will be able to benefit from. To know more, visit Simodec where the machine will be launched or contact the manufacturer at the address here below.
Overview of technical specifications
- Bar diameter at the spindle: 16 mm
- Max. part length (with synchronous guide bush): 180 mm
- Max. part length (working with collet): 50 mm
- Max. spindle and counter spindle speed: 12,000 rpm
- Max. number of tools: 28 (18 op. and 10 c.-op.)
- Rotating tool section: 12x12 mm
Tornos SA Industrielle 111 2740 Moutier Tél. +41 32 494 44 44 Fax +41 32 494 49 03 [email protected] www.tornos.com
To be seen at Simodec Halle A, Stand C32/D23.
