Small, precise and extremely fast! Maxon presents the sterilizable 50 Watt drives "EC Size 5" and "EC 13" For the use in high speed medical applications of up to 90’000 rpm. Stand-alone, or as motor/gear combination, the drives stand out by high power, extremely low-noise and low-vibration operation, marginal heat generation and minimal size - welcome characteristics particularly in medical handheld power tools.
.
.
All models are designed the same way and comparable in terms of performance and characteristics. On the other hand, their external dimension is suitable for the geographic market for which it is intended. Size 5 variant are consistent with the US dimensions: Customary Units. Their diameter is therefore of half-inch while the shaft is 0.125 inch. Motors are also equipped with "Servo Mount", a type of fixing system widespread on this market. On the contrary, the EC 13 variant / GP 13 is intended for markets that use metric: outside diameter is 13 mm and the shaft is 3 mm. The motor is equipped with a flat flange with 3 threads on the front.
Application
- Hand tools that can be sterilized, such as bone saw, bone drilling and grinding machine
- Dermatological and dental tools
- Infusion pumps
- ECG
- Therapy aid, analysis and dialysis equipment For every market Maxon motor proposes solutions suited to every market… based on the same powerful characteristics. A special compact design particularly adapted for medical use, a very high nominal speed, quiet running, minimized heat generation and sterilizability in the autoclave. The motors are available with Hall sensors or sensorless and with three different windings. The gearheads come in reductions of one, two or three levels with or without output end shaft seal.
Sterilisation information
- Sterilisation with steam
- Temperature +134°C ± 4°C
- Compression pressure up to 2.3 bar
- Rel. humidity 100 %
- Cycle length 20 minutes
More information can be found here.
maxon motor ag Brünigstrasse 220 Postfach 263 CH-6072 Sachseln Tél: +41 (41) 666 15 00 Fax: +41 (41) 666 16 50 [email protected]
