The trend is clear: increasing numbers of GrindTec exhibitors, but also new companies, are showing great interest in making sure of their participation at the world’s leading platform for grinding technology very early on.
The trend is clear: increasing numbers of GrindTec exhibitors, but also new companies, are showing great interest in making sure of their participation at the world’s leading platform for grinding technology very early on.
Numerous companies had contacted the project management for this reason in recent weeks and months. Because of this, the GrindTec event organizer AFAG has decided to send out the participation documents this November. Parallel to this they will also be offered on the homepage as a download.
AFAG optimally prepared for further growth of the GrindTec
The recent 2016 GrindTec was also able to shine with three best achievements: 577 exhibitors, 17,950 visitors and 42,000m² of exhibition area – it set new records in these fundamental criteria. The event manager AFAG assumes that these records will already be history at the coming exhibition. A temporary exhibition hall will accommodate the expected growth. This hall is perfectly integrated in the visitors’ tour by means of single passage from hall 3.
Excellent results for GrindTec exhibitors
The backdrop of the excellent results of the exhibitors makes it easy to understand the continual growth of the GrindTec. The Gelszus exhibition market research in Dortmund thus obtained the following results within the framework of a representative survey at the GrindTec 2016: 64% assessed their participation at the exhibition as “very good” or “good”, a further 28% were “satisfied”. The estimation of business after the exhibition is als extremely positive: 74% have “very good” or “good” expectations and for a further 20% they are “satisfactory”.
Order Exhibition GrindTec: 2,700 visitors place orders
GrindTec visitors are assessed very highly by the exhibitors. Almost all the visitors are experts in the field of grinding technology; added to this is the high decision-making competency. 85% are “sole or joint decision-makers” or at least “advisory participants”. For the majority of them (57%) the visit is to prepare or secure an investment, 15% signed an order. This means a minimum of 2,700 orders, an average of at least 4.7 per exhibitor! A total of 66% of visitors said they had made contacts at the GrindTec 2016 which could lead to orders after the exhibition.
More guests from Asia
Almost a third (31%) of GrindTec visitors come from abroad. Neighbouring European countries still dominate here, but the increasing interest shown particularly by Asia is conspicuous. Approximately 1,300 visitors from Asia were registered, and China’s representation was the highest here. Guests from a total of almost 60 nations had come to Augsburg, which was also a new record.
Here’s to the next round: GrindTec 2018 from 14 to 17 March
The participation documents will be sent to the exhibitors in the coming days; they are also available as a download on the GrindTec homepage: . As the exhibitor papers are being offered two months earlier this time, the exhibition hall planning is also being moved forward to Mai 2017. As always, the project management advises registration as early as possible so that position requests can be considered earlier.
The WomenPower 2023 Career Congress marks the eleventh time that Deutsche Messe honors a female professional from the STEM sector. This person will be selected for having implemented innovative trends in the technical environment of a company through her commitment, ideas or performance. Besides this, the Young Engineering Award will be presented for the first time. This will go to a woman from the STEM field who is no more than 30 years old and who has made exceptional contributions in the (…)
With the deadline just two weeks away, more than 1,000 exhibitors have already registered for EMO Hannover 2023. "We are delighted to see such a great response from the international companies after the event’s four-year hiatus," says Martin Göbel, Head of Trade Fairs at EMO organizer VDW (German Machine Tool Builders’ Association), Frankfurt am Main. Big-name companies from 36 countries have already signed up to attend. 64 percent of the registered companies come from abroad. After Germany, (…)
This year’s parts2clean was probably the most clearly focused edition in the event’s history. Almost every one of the more than 2,300 visitors came to the Stuttgart Exhibition Center armed with concrete tasks and projects. For the approximately 140 exhibitors from 16 different countries, this resulted in high-caliber leads that promised to result in good follow-up business. Compared to the restart event last year, parts2clean 2022 was able to grow significantly in all areas. By the end of (…)
After 2 years of absence (Covid obliges) the 2022 edition took place in a friendly and energizing environment at the former slaughterhouses of La Chaux-de-Fonds. This place, charged with an industrial past from the middle of the 19th century, located in the heart of the watchmaking and microtechnical activities of the Jura Arc, has undergone various judiciously nuanced transformations which now give it a versatility allowing it to host the TWS show in the best conditions. The 64 exhibitors (…)
Successful re-launch: held for the 20th time this year, AMB was an upbeat and inspiring event across the fair halls and the sector in general. For five days, a total of 64,298 visitors frequented the fully booked Stuttgart fair grounds. The event once again put AMB at the centre of the metal working sector. The 1,238 exhibitors from around the world – with around 25 percent hailing from outside Germany– presented a variety of innovations, products, services and concepts. Despite the (…)
The seventh edition of LASYS ended on Thursday amidst a positive mood. In Mahle Hall 4 at the Messe Stuttgart trade fair, trade visitors from all over Europe gathered information from a total of 93 exhibitors from 16 countries. The proportion of international exhibitors was 34%. "LASYS has fared well in a strong market environment with many major events in May and June of this year. With its clear focus on laser material processing, LASYS provided an attractive market platform to interested (…)
After the break due to COVID in 2020, the international trade fair for surface technology started yesterday in Stuttgart. Until June 23th, around 220 exhibitors from 18 countries will present solutions, products and services and show what the current trends are in the surface treatment industry. As an interdisciplinary technology, surface technology is at home in all industries. The spectrum of industrial sectors from which visitors come to SurfaceTechnology GERMANY is correspondingly broad. (…)
EPHJ, the international high-precision trade fair, has completed its 20th anniversary edition with a clear increase in numbers compared to the 2021 edition and a quality of visitors welcomed by the 700 exhibitors. As the doors of the world’s only trade fair dedicated to high precision watchmaking, jewellery, microtechnology and medicine close, the organisers are smiling. "We knew that visitor numbers would be higher than in September 2021, when the health crisis ended," explains Alexandre (…)
Following the successful relaunch of parts2clean in October 2021, the event is back: From 11 to 13 October 2022, parts2clean – the leading industry event for industrial parts and surface cleaning – will take place at the Stuttgart exhibition center. With their wide range of products, solutions and services, numerous market leaders from Germany and abroad will present their offerings for applications-oriented, cost-effective cleaning. The changes taking place in numerous industrial sectors (…)
From June 21 to 24, METAV will once again be held at its usual location in Düsseldorf. Here, the trade fair, which is known for its high visitor quality, is closing an important gap for exhibitors and trade visitors after a pandemic-related break. Economically, following the COVID-19 pandemic, METAV does indeed fall at a difficult time with major challenges, with supply chain issues and the impact of the Russian attack on Ukraine causing concern. Nevertheless, it comes at the right time to (…)
© 2026 EUROTEC - ALL RIGHTS RESERVED.