The trend is clear: increasing numbers of GrindTec exhibitors, but also new companies, are showing great interest in making sure of their participation at the world’s leading platform for grinding technology very early on.
The trend is clear: increasing numbers of GrindTec exhibitors, but also new companies, are showing great interest in making sure of their participation at the world’s leading platform for grinding technology very early on.
Numerous companies had contacted the project management for this reason in recent weeks and months. Because of this, the GrindTec event organizer AFAG has decided to send out the participation documents this November. Parallel to this they will also be offered on the homepage as a download.
AFAG optimally prepared for further growth of the GrindTec
The recent 2016 GrindTec was also able to shine with three best achievements: 577 exhibitors, 17,950 visitors and 42,000m² of exhibition area – it set new records in these fundamental criteria. The event manager AFAG assumes that these records will already be history at the coming exhibition. A temporary exhibition hall will accommodate the expected growth. This hall is perfectly integrated in the visitors’ tour by means of single passage from hall 3.
Excellent results for GrindTec exhibitors
The backdrop of the excellent results of the exhibitors makes it easy to understand the continual growth of the GrindTec. The Gelszus exhibition market research in Dortmund thus obtained the following results within the framework of a representative survey at the GrindTec 2016: 64% assessed their participation at the exhibition as “very good” or “good”, a further 28% were “satisfied”. The estimation of business after the exhibition is als extremely positive: 74% have “very good” or “good” expectations and for a further 20% they are “satisfactory”.
Order Exhibition GrindTec: 2,700 visitors place orders
GrindTec visitors are assessed very highly by the exhibitors. Almost all the visitors are experts in the field of grinding technology; added to this is the high decision-making competency. 85% are “sole or joint decision-makers” or at least “advisory participants”. For the majority of them (57%) the visit is to prepare or secure an investment, 15% signed an order. This means a minimum of 2,700 orders, an average of at least 4.7 per exhibitor! A total of 66% of visitors said they had made contacts at the GrindTec 2016 which could lead to orders after the exhibition.
More guests from Asia
Almost a third (31%) of GrindTec visitors come from abroad. Neighbouring European countries still dominate here, but the increasing interest shown particularly by Asia is conspicuous. Approximately 1,300 visitors from Asia were registered, and China’s representation was the highest here. Guests from a total of almost 60 nations had come to Augsburg, which was also a new record.
Here’s to the next round: GrindTec 2018 from 14 to 17 March
The participation documents will be sent to the exhibitors in the coming days; they are also available as a download on the GrindTec homepage: . As the exhibitor papers are being offered two months earlier this time, the exhibition hall planning is also being moved forward to Mai 2017. As always, the project management advises registration as early as possible so that position requests can be considered earlier.
2015 was a record-breaking year. In addition to a 10% increase of the exhibition area, Industrie Lyon proposed a comprehensive offer to nearly 20,500 professionals, an increase of over 17%. The 859 exhibitors met with project-bearing visitors looking for innovations and solutions to revive French manufacturing. They welcomed the business, with orders for investment and consumables signed at the booths. The trend toward recovery still lacks long-term visibility. Innovation Awards At the (…)
Effective cleaning of components and surfaces is an issue for practically every manufacturer today, not least because the bar for cleanliness is constantly being raised. At the same time the pressure on costs is also rising. So manufacturers face a twofold challenge: they have to meet specifications for cleanliness with the right technology – consistently and reliably – and they have to do so at an affordable cost. “This year’s parts2clean offers a wider range of solutions than ever before”, (…)
SIAMS announces a lot of improvements for the 2016 edition of SIAMS to be held in Moutier from April 19th till 22nd, 2016. Given the success of 2014, the satisfaction of the exhibitors and the 17,000 registered visitors, the organizers decided to raise the bar even higher for the 2016 edition. The 2014 edition of the microtechnology trade fair closed with great success. More than 80% of the exhibitors of SIAMS 2014 said they wanted to participate in the 2016 edition of this fair that has (…)
In cooperation with the new trade fair for tool, pattern and mould making, the BME Forum entitled „Purchasing of tools“ will be held at the same time in Stuttgart. With the German Association for Materials Management, Purchasing and Logistics (BME) and its BME Forum entitled "Purchasing of tools", Moulding Expo has found the perfect partner to achieve this goal. On 6 and 7 May 2015, the BME will stage a 2-day seminar concurrently with the trade fair in Stuttgart. This seminar is expected (…)
AMB, the international exhibition for metal working, was a huge success in 2014. For over 80 per cent of AMB exhibitors, it was clear that they want to take part again in 2016 - including many domestic and global market leaders. A tremendous declaration of loyalty to AMB, which will take place over five days, from 13 to 17 September 2016, in Stuttgart. "The overwhelming demand stresses the character of AMB as the leading trade fair, which in even-numbered years takes pole position in (…)
Taking place at the Metro Radio Arena in Newcastle on 8th-9th July 2015, Manufacturing & Engineering North East will showcase the region’s strengths and provide a platform for the local and national manufacturers, engineers and their suppliers to meet, learn, solve problems and develop business ideas. The event will comprise three key elements covering the full range of design, production and manufacturing: With keynotes from senior manufacturing and engineering professionals at (…)
Great anticipation among exhibitors about their new exhibition Over the past few weeks, the two Moulding Expo project managers, Florian Niethammer and Florian Schmitz, have repeatedly stressed the importance of "organising an exhibition based on the requirements of the exhibiting companies". This is the only way the international event can really be implemented under the slogan "By the industry for the industry". Statements from some selected exhibitors already show they are looking (…)
16 months before the trade fair opens, more than 175 companies from 12 countries have already made firm bookings for their booth locations at PaintExpo 2016. As a result, approximately 50% of all exhibition floor space occupied at the event in 2014 has already been booked. The international trade fair for industrial coating technologies to be held in April 2017 due to the schedule change to the odd-numbered years is also right on course: roughly 80% of the companies have decided to (…)
Euromold – The World Fair for Moldmaking and Tooling, Design, Additive Manufacturing and Product Development will take place in Düsseldorf from September 22 to 25, 2015. With the move to Düsseldorf Euromold reinvents its position. The new exhibition concept will also give exhibitors the opportunity to take an active part in ‘shaping’ Euromold 2015. Euromold invites exhibitors to Düsseldorf for info days on January 20 and 22, 2015. Interested exhibitors are invited to join us in (…)
Subcontratación, the International Fair of Manufacturing Processes & Equipment, is to place more emphasis on B2B meetings at its 2015 edition, increasing investment and efforts in a campaign to invite hosted buyers to take part in its programme of pre-arranged meetings. The possibility of taking part in the European Industrial Subcontracting Meetings is one of the major attractions of the event, which is to be the biggest pre-arranged B2B meeting event held in Spain to date. The types (…)
© 2026 EUROTEC - ALL RIGHTS RESERVED.