Machines

Boosting growth with innovations

July 2010

For the AMB in Stuttgart, DMG will present 25 high-tech machines in action, among these six world premieres as well as future-oriented power cell systems from the Energy Solutions division

.At the AMB, DMG Microset GmbH takes tool presetting to the next level with its new matrix technology. The control unit of the MICROSET system uses an air cushion to move over a 100 % level glass pane with a DataMatrix code in the form of a chess pattern ("Matrix"). The camera holder freely moving on the glass bed can be approached to the horizontally inserted tool from any side. This allows, for the first time, unlimited measuring of the most varied tools, making previous differentiation between horizontal and vertical setting units obsolete. .

At the AMB in Stuttgart in Hall 7, DMG will present a total of 25 high-tech machines in action on more than 1.200 m2 of exhibition surface, among these six world premieres as well as productive automation solutions, service products and service offers from the DMG field of Service Solutions. As an example for the new GILDEMEISTER Energy Solutions division, the Würzburg based group company a+f GmbH presents the new battery system cellcube. The battery system solves the problems of energy storage and thus serves an uninterrupted power supply for example as back-up power solution to prevent sensitive systems from failure.

Among the AMB highlights in the field of turning technology are:

The compact turning/milling centre CTX alpha TC,
the 2 spindle turning centre SPRINT 42/10 linear,
a new machine as extension of the TWIN technology. Once again, the innovations in milling technology document DMG’s status as a world market leader in 5 axis technologies:
The DMU 60 eVo linear from DECKEL MAHO Seebach complements the series of universal machines with tilting round table with a medium-sized model,
the DMU 65 from DECKEL MAHO Pfronten GmbH marks the start of an entirely new machine generation for universal complete machining.

Last but not least, DMG Microset GmbH will exhibit the sixths world premiere on the AMB stand. With its matrix technology, the Bielefeld based company takes tool presetting to the next level.

DMG Vertriebs und Service GmbH Tel.: +49 (0) 5205 / 74-0 www.dmg.com

AMB 2010 Hall 7 / Stand 7D12

Machines

Laser deposition welding & milling in a single solution

September 2014

The AMB Stuttgart started yesterday with the halls full of visitors. At the DMG MORI booth (quite crowded too), many novelties. Among them, the new Lasertec 65D hybrid machine. Let’s have a look at it. For the first time additive manufacturing is integrated into a high-tech 5-axis milling machine. This innovative hybrid-solution combines the flexibility of the laser metal deposition process with the precision of the cutting process and therewith allows additive manufacturing in milling (…)

Machines

Higher productivity with metal bonds - but how do you dress them?

September 2014

The integrated electro-discharge dressing technology WireDress® opens up brand new possibilities for grinding with metal-bonded grinding wheels and drastically cuts auxiliary times. According to Fritz Studer AG, it has been possible to increase grinding power in the grinding process by 30% and reduce grinding wheel wear by 70% in comparison with ceramic and resin bonds. Grinding wheels with very intricate con-tours can also be dressed. . Metal-bonded grinding wheels offer particular (…)

Machines

Two spindles in a compact footprint

September 2014

At the base of the specifications of the new s100 product line just unveiled by Bumotec, a simple idea: to create a product with maximum productivity in a minimal floor space. This while ensuring both quality of work and accuracy superior to the constraints of the watchmaking world. After 4 years of development, the s100mono and s100multi machines are being marketed and results exceed expectations. Meeting with Charles Dénervaud, responsible for marketing of the near-Fribourg based company. (…)

Machines

New internal cylindrical grinding machine for short and long workpieces.

September 2014

The new S141 from Studer has been redesigned from the ground up. However, the development also incorporates the know-how from many decades of grinding experience and consolidated state-of-the-art engineering knowledge. In addition to long-lasting and reliable quality and precision, the use of both cutting-edge and proven technologies, optimal ergonomics and ease of use were also important goals. The machine’s ergonomic design and user friendliness are evident at first glance. Two generous (…)

Machines

Bumotec’s new premises for the future

September 2014

The new building the company has started to build is large, clear, widely open and will have very low energy consumption. The work started with a brief ceremony with the presence of the authorities as well as the press on August 29, 2014. Located in Vuadens in the Fribourg Canton, the new building is ideally positioned close to the motorway and for employees; it’s only a few kilometers from the actual site that is definitely cramped and too small. With the planned growth of the company, (…)

Machines

Swiss GT 26 – a new generation

August 2014

Following six high-profile years on the market the Tornos Gamma 20 is now giving way to the new generation - the Swiss GT 26 (capacity 25.4 mm with end bar preparation); this machine will take Tornos to a new level in terms of performance and functionality. The Swiss GT 26 uses the same kinematics that made the Gamma 20 machine so successful. It allows operators to quickly get to grips with the machine. The GT line is made up of two models equipped with 5 and 6 linear axes. The 5-axis model (…)

Machines

Gear cutting at the forefront of technology

August 2014

In microtechnology, gear cutting is an operation adding value and if it is possible to realise the parts by different means, the use of a dedicated machine remains very often the best solution. Meeting with Mr. Sébastien Giran, responsible for marketing at Affolter Technologies SA. “Gear cutting in small diameters is our specialty and we are able to propose the most effective solutions by offering the best quality to our customers” says the Manager to start. In this logic of answering to (…)

Machines

Setting a standard in machine tool maintenance

August 2014

UK-based Precision Technologies Group (PTG) has totally revised its range of machine tool maintenance and support services, to provide what it believes to be one of the most comprehensive and cost-effective customer care packages available for machine tool users globally. Under the name of Absolute Care, the company has created a suite of tailored maintenance solutions for users of its Holroyd ultra-precise milling and grinding machines. A similar range of Absolute Care services is (…)

Machines

Tornos CT 20: new entry-level machine

August 2014

Tornos made its first foray into entry-level machines in 2008 with the Delta range, and this product very quickly won over the market with its ease of use and excellent value for money. Today, a new entry-level machine is ready to win its own converts: the new CT 20. We took this opportunity to find out exactly what secrets this new product is hiding. "The CT project is aimed at introducing a true 20 mm machine which offers flexibility on a scale never before seen in entry-level machines", (…)

Machines

Energy efficiency needs to pay off

August 2014

Keeping production energy requirements as low as possible is becoming an important competitive factor. The Institute of Production Management, Technology and Machine Tools, PTW for short, at the University of Darmstadt, will be represented with its own stand at the upcoming AMB. The most important issues facing production of tomorrow will be organised according to four clusters – one of which will focus on energy efficiency. Here, energy-optimised machine components and production (…)

Boosting growth with innovations

The Eurotec Newsletter