A ray of sunshine for the industry manifests itself as an upward trend: With more than 5000 expert visitors from around the world, the 10th OPTATEC at the Frankfurt Exhibition Centre marks an economic turning point.
A ray of sunshine for the industry manifests itself as an upward trend: With more than 5000 expert visitors from around the world, the 10th OPTATEC at the Frankfurt Exhibition Centre marks an economic turning point.
5217 expert visitors, well over 500 exhibitors, more than 190,000 square feet of overall occupied floor space, participants and visitors from over 30 countries around the globe – the 10th OPTATEC international trade fair for future optical technologies, components, systems and manufacturing closed with these figures on the 18th of June, 2010, and was thus able to assert itself exceptionally well! Not only was Frankfurt once again transformed into the Mecca of optical technologies during the four days of the event from the 15th through 18th of June, not only did most of the exhibitors from near and far enjoy good to very good leads and even close business deals, and not only did OPTATEC more than live up to its distinguishing characteristics – over 500 exhibitors, and ten times as many expert visitors, bear witness to the great importance of OPTATEC in this international field of business.
Exceptional Circumstances at OPTATEC: Concrete Deals Closed On-Site! Admittedly, things didn’t and still don’t look as bad for the sector as they do in other industries, but the current strong run of business caused a positive general mood to spread amongst the exhibitors, which of course was expressed in terms of comparatively high expectations. According to project manager Karen Waldow, developments amongst the expert visitors were even more encouraging, and upon enquiry the exhibitors expressly praised their quantity as well as their quality. After all, the 10th OPTATEC took place at an opportune time, because the industry is anticipating growth in the low 2-digit range. In addition to this, discussion regarding the subvention of solar and photovoltaic equipment has finally been objectivised once again, and the initially expected dramatic loss of orders is indeed no longer to be reckoned with, which is promoting confidence amongst the exhibitors as well as the users. OPTATEC – Leading Information and Business Platform, Unique Throughout the World Unanimous praise was expressed on the part of the exhibitor advisory board, the exhibitors, the event promotion partners and the expert visitors with regard to the comprehensive, star-studded supplementary and forum programme. International experts and decision makers were impressed by the pragmatic information and communication mix covering both theory and actual practice, as well as other exhibition offerings involving hardware and software. Optimisations and innovations in the customary applications for the optical technologies were showcased to just as great an extent as were the latest developments in the safety, LED, solar and photovoltaic technologies, as well as medical engineering. And thus OPTATEC has once again lived up to its reputation as a trendsetter, and interesting markets are developing from these trends now, and will continue to do so in the future, in which the exhibitors will be able to participate right from the very start. It’s unique throughout the world with regard to its industry-specific content, i.e. optical issues within production – a benefit which is greatly appreciated by the exhibitors as well as the expert visitors. Within this context, it’s also noteworthy that, according to statements issued by the exhibitors, the expert visitors arrived at OPTATEC with a previously unheard of volume of concrete projects intent on finding practicable solutions.
Seen in this light, the OPTATEC has once again more than lived up to its exceptional position despite, or perhaps precisely because of a greatly altered setting for trade fairs of a more multi-technical nature, which not least of all is good reason for private trade fair promoters P. E. Schall GmbH & Co. KG to look to the future with confidence – a future which will include the next OPTATEC taking place once again at the Frankfurt exhibition centre from the 22nd through the 25th of May, 2012.
P.E. Schall GmbH & Co. KG Rainer Färber Director of Marketing and PR Phone: +49 (0)7025 / 92 06-673 Fax: +49 (0)7025 / 92 06-625
The transformation of the automobile industry towards e-mobility is creating huge changes in terms of the way the industry works. Even if many components such as the bodywork and interior remain the same, new markets are opening up for which material processing using lasers represents the only efficient method of series production. For example, lasers are able to cut ultra-thin copper and aluminium films for the batteries, weld the copper coils for the electric motor and electronics (…)
More BIEMH than ever is now a reality, and the trade fair will be a milestone for many of the professionals who are eagerly preparing for it staging at Bilbao Exhibition Centre in June. With more than three months until the event, nearly 900 exhibitor firms have already booked 94% of the available space and the visitor campaign is also progressing at good pace. This will be the 31st edition of BIEMH, where the exhibitor companies’ desire to resume face-to-face meetings and make a brilliant (…)
Due to the current situation surrounding Covid, Deutsche Messe AG will stage the world’s leading trade show for industrial technology from 30 May to 2 June. The new date provides exhibitors and visitors with planning security. Deutsche Messe AG, in close cooperation with the HANNOVER MESSE exhibitor advisory board and partner associations VDMA (Association of German Mechanical and Plant Engineering) and ZVEI (Central Association of German Electrical Engineering and Digital Industry), has (…)
The METAV 2022, the International Exhibition for Metalworking Technologies, will be postponed from March to June 2022. The new date has been set for June 21 to 24. Dr. Wilfried Schäfer, Executive Director of METAV organizer VDW (German Machine Tool Builders’ Association), says: "Unfortunately, the corona pandemic continues to be highly dynamic with significantly increasing numbers of cases due to the omicron variant. The associated difficult and uncertain planning situation has led us to (…)
LASYS, which will take place from 21 to 23 June 2022, is the only international trade fair to focus on solutions for laser material processing. Since the start of the trade fair in 2008 it has successfully positioned itself as a user platform for laser system solutions and applications. LASYS is primarily aimed at decision-makers from the international industry across all sectors and covers a variety of materials. It shows the enormous application potential and range of applications. At (…)
Digitalization and sustainability – these are the key topics at HANNOVER MESSE 2022. The world’s leading trade show for industrial technology thus promotes more climate protection in business and industry and clearly illustrates how digitalization, automation and regenerative energies can collectively contribute. After the long pandemic-induced break, HANNOVER MESSE runs in April 2022 as a face-to-face event. “We are facing the greatest transformation since industrialization –into (…)
On October 15th, the first site-planning phase for AMB 2022 began. The project team is now reviewing the applications received and drawing up the first stand placement proposals. "It’s fantastic: the industry has firmly marked AMB 2022 in the trade show calendar and we can already report over 940 registrations for the next event. Together with exhibitors, we will design the best platform for all users of metal cutting technology from all over Europe next year to enable direct dialog and (…)
With more than 2,000 visitors from Germany and neighboring European Union countries, parts2clean restarted successfully after the pandemic-induced break. Approximately 130 exhibiting companies, one in five of them from outside Germany, presented new products and solutions for a wide variety of industry applications at the meeting point for parts and surface cleaning. parts2clean in Stuttgart demonstrated the increasing importance of cleaning processes in the age of Industrie 4.0 and AI. (…)
“Hello, new EMO Hannover!” is the greeting that was shared at the EMO Hannover Relaunch Conference in the hybrid event hub “H’UP” on the Hannover Messe trade fair grounds. As organizers of EMO Hannover, the German Machine Tool Builders’ Association (VDW) had invited international media representatives and EMO Hannover exhibitors to a digital presentation of the new exhibition concept on September 14 of this year. Fascinating keynotes and stimulating discussions gave an introduction to the (…)
From now on MedtecLIVE, the trade fair for the entire medical technology supply chain, will be an annual event alternating between the Stuttgart and Nuremberg exhibition centres. The “T4M –Technology for Medical Devices” show previously organised by Messe Stuttgart is being acquired by MedtecLIVE GmbH. It will now complement the content and product range of the new trade show being organised by MedtecLIVE GmbH. Through this partnership, the two trade fair companies are accommodating the (…)
© 2026 EUROTEC - ALL RIGHTS RESERVED.